VAN NORMAN AUTOMATIC SURFACER

VAN NORMAN BROACH

CYLINDER HEAD AND SMALL BLOCKS

  Back to Engine Page     Back to Home Page     Contact Us  

 

VAN NORMAN BROACH

Excellent condition. This one includes the flywheel grinding attachment.
 

 

Outstanding original condition machine. Will surface cylinder heads and small blocks. Includes standard accessories. Very little use on it. Only one like it around. Milling machine was specifically designed for resurfacing automotive and light truck cylinder heads and smaller blocks. The rugged design features a stationary cutterhead while the table traverses. There are two table traverse speeds so the operator can control the surface finish.

Priced at only $8,500.00                              Van Norman Broach  is only  $4,800.00

Optional CBN tooling is available for $1,500.00 additional

Table Travel 38"                         965mm
Millinghead Diameter 13.75"                    349mm
Table Length 36"                         914mm
Table Width 13"                         330mm
Cutterhead; H.P. 2 H.P.
Cutterhead Speeds: RPM 100 and 200 RPM
Maximum Work Height 12.1"                       307mm
Table Traverse Speeds: Inch Per Minute 3.15"    6.3" per minute
Table Traverse Speeds  mm per minute 800  and 1600 mm per minute
Distance Spindle CL to Column 9.5"                          245mm
Overall Length: 67"                          1700mm
Overall Width 44"                          1120mm
Overall Height 56"                          1420mm
Shipping weight 2180pounds              990kg.