Truck tire changer, truck wheel balancer, computer wheel alignment

 
  Back to Service Index   Back to Home  Contact Allstates  

Allstate's Of America, Inc.      800 223 2573      Fax 305 635-5353                        Voice  305 635-4525                e-mail to   Bob@allstates.com    

 

 

RAVAGLIOLI

Leader in the garage workshop equipment industry for over 40 years, in 110 countries

 

Since 1958, Ravaglioli has been a byname for experience, evolution and technology. The company's top-quality products have marked its history over the years. Safety, compliance with international standards, ongoing and stringent tests are all part of the Ravaglioli approach to equipment design, devised to fully answering the needs of operators in the automotive field. For over forty years, the Ravaglioli brand has successfully accompanied every stage of garage workshop operations, from vehicle repairs to controls and inspections.

Thi

This versatile machine is designed for easy, fast and accurate balancing of motorcycle, car and commercial wheels up to 200 kg of weight.
Microprocessor controlled with self-calibration and self-diagnostics.
Specific balancing programs for static (motorcycle wheels) and ALU wheels
(light alloy). The self-calibration program is easy and rapid and does not require a balanced wheel.
One single spin with low rotation speed provides all the values.
The display clearly indicates when sufficient speed is reached for measuring.
Display readout of out of balance values and the related position on the wheel.
Wheel diameter and width in inches or millimeters.
Unbalance readout in grams or ounces.
By the same control lever it is possible to command the spin of the wheel, to stop it by means of the drum brake and to keep it blocked to apply the weights.

 

 low rotation speed provides all the values.
The display clearly indicates when sufficient speed is reached for measuring.
Display readout of out of balance values and the related position on the wheel.
Wheel diameter and width in inches or millimeters.
Unbalance readout in grams or ounces.
By the same control lever it is possible to command the spin of the wheel, to stop it by means of the drum brake and to keep it blocked to apply the weights.

 

 

TYRE-CHANGER FOR 14" TO 26" WHEELS

Tyre-changer for commercial vehicles wheels (14"/26" wheels).
In order to avoid any damage to the rim, the hydraulic pressure of the rim clamping chuck is adjustable. The operating dimensions of the rim clamping unit and of the head-tool carriage allow the tyre changer to operate on a whole range of wheels, including super-single.

 

 

TD 1600A

- The TD 1600A series wheel aligner, thanks to its innovative design concept and use of state - of - the - art technologies and components represents the very best choice in terms o price/performance ratio.
- All the characteristic angles of both vehicle axles are controlled by means of four measuring heads with 8 CCD sensors and infra - red transmission (6 CCD sensors on TD 1 660A). The lightweight measuring heads and absence of connection cables between front and rear make the system very easy to use.
- The wheeled control unit houses the data processing and management PC board, the color printer and the 15" SVGA high - resolution monitor. Special supports on the side of the control unit permit housing and recharging the measuring - head batteries when these are not in use. The user interface consists of the keyboard, controls can also be used directly on the measuring heads by means of the special function keyboards.